4. Keyboard power (3-pin KBPWR1)

This jumper allows you to enable or disable the keyboard wake-up feature. Set this jumper to pins 2-3 (+5VSB) to wake up the computer when you press a key on the keyboard (the default is the Space Bar). This feature requires an ATX power supply that can supply at least 1A on the +5VSB lead, and a corresponding setting in the BIOS.

DSBV-D

DSBV-D Keyboard power setting

KBPWR1

1 2

2 3

+5V +5VSB (Default)

5. VGA controller setting (3-pin VGA_EN1)

These jumpers allow you to enable or disable the onboard VGA controller. Set to pins 1-2 to activate the VGA feature.

DSBV-D

DSBV-D VGA setting

VGA_EN1

1

2

2

3

Enable Disable (Default)

4-

Chapter 4: Motherboard information