Asus TS500-E4 Server 5.6 Security menu, To set a password:, Enter new password, To clear the password:, User Password Is [Clear], Supervisor Password Is [Clear]

5.6 Security menu

	PhoenixBIOS Setup Utility
Main Advanced Server	Security	Boot	Exit
Supervisor Password Is:	Clear			Item Specific Help
User Password Is:	Clear
				Supervisor Password
Set Supervisor Password	[Enter]
				controls access to the
Set User Password	[Enter]
				setup utility.
Password Check	[Setup]
Password Lock Mode	[Disabled]
Removable Device Boot	[Enabled]
Flash Write	[Enabled]

F1	Help	↑↓	Select Item	-/+	Change Values	F9	Setup Defaults
ESC	Exit	→←	Select Menu	Enter	Select Sub-Menu	F10	Save and Exit

Supervisor Password Is [Clear]User Password Is [Clear]These fields allow you to set passwords:To set a password:1.Select an item then press <Enter>.

2.Type in a password using a combination of a maximum of eight (8) alpha-numeric characters, then press <Enter>.

3.When prompted, confirm the password by typing the exact characters again, then press <Enter>. The password field setting is changed to Set.

To clear the password:

1.Select the item Set Supervisor Password or Set User Password, depending on which password you want to clear. Press <Enter>.

The following message appears:

					PhoenixBIOS Setup Utility
Main Advanced			Server	Security		Boot	Exit
Supervisor Password Is:					Clear			Item Specific Help
User Password Is:					Clear			Supervisor Password
Set Supervisor Password					[Enter]
								controls access to the
Set User Password					[Enter]
								setup utility.
Password
Password			Set Supervisor Password
Removable
Flash
		Enter Current Password					[		]
		Enter new password					[		]
		Confirm new password					[		]
F1	Help	↑↓	Select Item		-/+	Change Values		F9	Setup Defaults
ESC	Exit	→←	Select Menu		Enter	Select	Sub-Menu	F10	Save and Exit

5-36 Chapter 5: BIOS information