2.10 Removable components

You may need to remove previously installed system components when installing or removing system devices, or when you need to replace defective components. This section tells how to remove the following components:

1.Chassis fan2.HDD blowers3.SATA/SAS backplanes4.MemCool FB-DIMM fan kit5.Floppy disk drive module6.Front I/O board7.Chassis footpads and roller wheels8.Power supply unit

2.10.1 Chassis fan

To remove the chassis fan:1.Unplug the chassis fan cable from the REAR_FAN1 connector on the motherboard.2.Locate the four screws that secure the fan to the chassis.

3.Remove the four screws while carefully supporting the chassis fan with your free hand to prevent it from falling off.

Set the screws aside.4.Carefully remove the chassis fan.

ASUS TS500-E4

2-31