Asus TS500-E4 Server 5.8 Exit menu, Save Changes and Exit, SETUP prompt [Enabled], Discard Changes and Exit, Interrupt 19 Capture [Enabled], When a confirmation window appears:

SETUP prompt [Enabled]

When this item is set to Enabled, the system displays the message “Press DEL to run Setup” during POST. Configuration options: [Disabled] [Enabled]

Interrupt 19 Capture [Enabled]

When set to [Enabled], this function allows the option ROMs to trap Interrupt 19. Configuration options: [Disabled] [Enabled]

5.8 Exit menu

	PhoenixBIOS Setup Utility
Main Advanced Server	Security	Boot	Exit
Save Changes and Exit				Item Specific Help
Discard Changes and Exit
Discard Changes				Save any changes to CMOS,
Load Setup Defaults				exit BIOS Setup then reboot
				system.

F1	Help	↑↓	Select Item	-/+	Change Values	F9	Setup Defaults
ESC	Exit	→←	Select Menu	Enter	Select Sub-Menu	F10	Save and Exit

Save Changes and Exit

Select this option then press <Enter>, or simply press <F10>, to save your changes to CMOS before exiting the Setup utility.

When a confirmation window appears:•select [Yes], then press <Enter> to save and exit.

•select [No], then press <Enter>, or simply press <Esc>, to cancel the command and return to the Exit menu.

Discard Changes and Exit

Select this option then press <Enter> if you wish to exit the Setup utility without saving your changes.

When a confirmation window appears:

•select [Yes], then press <Enter> to discard your changes and exit.

•select [No], then press <Enter>, or simply press <Esc>, to cancel the command and return to the Exit menu.

5-40 Chapter 5: BIOS information