Asus TUSL2-C NOTES, Control, Setting, USWR01, USWR56, ASUS TUSL2-CUser’s Manual, 2)USB Device Wake Up (USWR01, USWR56), [2-3], Enable, Disable, [1-2](default)

3.HARDWARE SETUP

2)USB Device Wake Up (USWR01, USWR56)

These jumpers disable or enable the USB device wake up function. Set these jumpers to Enable to wake up the computer with USB devices. This feature requires an ATX power supply that can supply at least 2A on the +5VSB lead. The default is set to Disable because not all computers have the appropriate ATX power supply. The computer will not power ON if the jumper is set to Enable and if the wrong ATX power supply is connected. NOTE: This jumper must be set in conjunction with Wake On USB for STR State in 4.5.1 Power Up

Control.NOTES1.For enabling Wakeup during STR/STD/Soft off functions, set to Enable.

2.The total current consumed must NOT exceed the power supply capability (+5VSB) whether under normal working conditions or in the sleep mode.

Setting	USWR01, USWR56
Disable	[1-2] (default)
Enable	[2-3]
	1	2	2	3
		USBPWR01
	Disable		Enable
	(Default)
		USBPWR56
	1	2	2	3
	TUSL2-C
	Disable		Enable
	(Default)

TUSL2-C USB Device Wake Up

.3 SETUPH/W

Motherboard Settings

ASUS TUSL2-C User’s Manual 19