3.HARDWARE SETUP

17)ASUS iPanel Audio Connector (12-1 pins AAPANEL)

Connect the audio cable from the optional ASUS iPanel to this for front panel audio control.

AAPANEL

Line out_R Line in_R

AGND3 AGND2

Line out_L Line in_L

AGND

MICPWR MIC2

TUSL2-C

TUSL2-C Audio Panel Connectors

.3 SETUPH/W

18)Chassis Intrusion Lead (2-pin ACHA)

This lead is for a chassis designed for chassis intrusion detection. After-market toggle switches may also be installed to the chassis panel or on any removable components. Two wires should be available from the chassis to connect to this lead. When any chassis component is removed, the contact should open and the motherboard will record a chassis intrusion event. The event can then be pro- cessed by software such as LDCM. If the chassis intrusion lead is not used, a jumper cap must be placed over the pins to close the circuit.

Connectors

ACHA

TUSL2-C

TUSL2-C Chassis Open Alarm Lead

ASUS TUSL2 User’s Manual

37