.3

H/WConnectors

SETUP

3.HARDWARE SETUP

19)Wake-On-LAN Connector (3-pin WOL_CON)

This connector supplies a LAN card with a Wake-On-LAN output, such as the ASUS PCI-L101 Ethernet card (see 7. Appendix). The connector powers up the system when a wakeup packet or signal is received through the LAN card.

IMPORTANT: This feature requires that Wake On LAN or PCI Modem is enabled (see 4.5.1 Power Up Control) and that your system has an ATX power supply with at least 720mA +5V standby power.

IMPORTANT: Requires an ATX power supply with at least 720mA +5 volt standby power

WOL_CON

+5 Volt Standby PME

TUSL2-C

Ground

TUSL2-C Wake-On-LAN Connector

20)Wake-On-Ring Connector (2-pin WOR_CON)

This connector supplies internal modem cards with a Wake-On-Ring output. The connector powers up the system when a ringup packet or signal is received through the internal modem card. NOTE: For external modems, Wake-On-Ring is detected through the COM port.

IMPORTANT: This feature requires that Wake On LAN or PCI Modem is enabled (see 4.5.1 Power Up Control) and that your system has an ATX power supply with at least 720mA +5V standby power.

 

WOR

 

Ring# Ground

TUSL2-C

2

1

 

TUSL2-C Wake-On-Ring Connector

38

ASUS TUSL2 User’s Manual