Settings Motherboard

SETUP H/W .3

3.HARDWARE SETUP

3)Onboard CMI8738 PCI Audio Setting (AUDIO_EN) (available on audio model only)

The onboard CMI8738 PCI 6 channel Audio chip may be enabled or disabled using these jumpers. Disable the onboard audio Codec if using a PCI audio card on any of the expansion slots or a primary audio/modem CNR on a CNR slot (see CNR Slot later in this section).

Setting

 

 

AUDIO_EN

Enable

 

 

[1-2] (default)

Disable

[2-3]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AUDIO_EN

 

 

1

2

2

3

 

Enable

Disable

 

(Default)

TUSL2-C

 

 

TUSL2-C Audio Setting

4)Keyboard Power Up (KBPWR)

This jumper disables or enables the keyboard power up function. Set this jumper to Enable if you wish the keyboard (by pressing <Spacebar>) to power up the computer. This feature requires an ATX power supply that can supply at least 300mA on the +5VSB lead. The default is set to Disable because not all computers have the appropriate ATX power supply. The computer will not power ON if you set this to Enable and if the wrong ATX power supply is connected. NOTE: This jumper must be set in conjunction with Wake On PS2 KB/PS2 Mouse/CIR in 4.5.1 Power Up Control.

Setting

KBPWR

Enable

[1-2] (default)

Disable

[2-3]

KBPWR

3

2

2

1

EnableDisable (Default)

TUSL2-C

TUSL2-C Keyboard Power Setting

20

ASUS TUSL2-C User’s Manual