The Marvell® 88SE6145 RAID BIOS Configuration utility allows you to create RAID 0, RAID 1, RAID 10, or RAID 5 set(s) from Serial ATA hard disk drives that are connected to the Serial ATA connectors supported by the Southbridge.
To enter the Marvell® RAID BIOS Configuration utility:
1.Install all the Serial ATA hard disk drives at Red SATA Connector.
2.Turn on the system.
3.During POST, press <Ctrl> + <M> to enter the utility main menu.
ENTER/SPACE:Select, ESC:Back/Exit
[Adapter]
[Create] [Delete]
Adapter 1
Arrays Information:
No array is defined!
Disks Information: | Size | Speed | Status | ||
ID Port | Disk Name | ||||
0 | 0 | SATA: Hitachi HDS721010KLA330 | 1TB | SATA II | FREE |
4 | 1 | SATA: Hitachi HDS721010KLA330 | 1TB | SATA II | FREE |
8 | 2 | SATA: Hitachi HDS721010KLA330 | 1TB | SATA II | FREE |
12 | 3 | SATA: Hitachi HDS721010KLA330 | 1TB | SATA II | FREE |
Marvell BIOS Setup (c) 2006 Marvell Technology, Ltd.
4.Press <Enter> and select a desired adapter for RAID configuration.
ENTER/SPACE:Select, ESC:Back/Exit
[Adapter]
[Create] [Delete]
Select Adapter
Adapter 1
Adapter 2
Marvell BIOS Setup (c) 2006 Marvell Technology, Ltd.
The RAID BIOS setup screens shown in this section are for reference only and may not exactly match the items on your screen.
Chapter 5: RAID configuration |