4.Marvell® 88SE6145 Serial ATA RAID connectors [black]
These connectors are for Serial ATA signal cables that support Serial ATA hard disk drives. To configure RAID 0, RAID 1, RAID 5 or RAID 10, install an internal Serial ATA hard disk drive to one of these connectors and an external Serial ATA drive to one of the external SATA ports.
P5E WS PRO
EXT_SATA2 |
| EXT_SATA1 | ||||||||||||||||
| GND TXP2_RSATA TXN2_RSATA GND RXP2_RSATA RXN2_RSATA GND | GND TXP1_RSATA TXN1_RSATA GND RXP1_RSATA RXN1_RSATA GND | ||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
P5E WS Professional EXT_SATA connectors
• Please install the Marvell® Controller driver before using the black Serial ATA RAID connectors
•If you intend to create a RAID configuration using one of the Marvell® Serial ATA RAID connectors and one of the external SATA ports, it is strongly recommended to install the OS on the internal hard disk drive and use the external hard disk drive as a data disk.
Before creating a RAID set using Serial ATA hard disks, make sure that you have connected the Serial ATA signal cables and installed Serial ATA hard disk drives; otherwise, you cannot enter the Marvell RAID utility and SATA BIOS setup during POST.
Chapter 3: Motherboard information |