2.1Chassis cover

2.1.1Removing the left side cover

You have to remove the left side cover to install or replace internal components of the server system.

•Ensure that you unplug the power cord before removing the side cover.

•Take extra care when removing the side cover. Keep your fingers from components inside the chassis that can cause injury, such as the CPU fan, rear fan, and other sharp-edged parts.

To remove the left side cover

1. Remove the two screws that secure the left side cover to the chassis.

1

1

2.Slide the left side cover for about half an inch toward the rear until it is disengaged from the chassis.

3.Carefully lift the cover and set it aside.

2

2-2

Chapter 2: Hardware setup