Hard Disk Write Protect [Disabled]

Disables or enables device write protection. This will be effective only if device is accessed throuh BIOS Confiuration option: [Disabled] [Enabled]

SATA Detect Time Out (Sec) [35]

Selects the time out value for detecting ATA/ATAPI devices.

Configuration options: [0] [5] [10] [15] [20] [25] [30] [35]

4.3.7AHCI Configuration

This menu is the section for AHCI configuration. It appears only when you set the Configure SATA as item from the sub-menu of SATA Configuration to [AHCI].

AHCI Settings

AHCI CD/DVD Boot Time out [15]

AHCI Port1 [Not Detected]

AHCI Port2 [Not Detected]

AHCI Port3 [Not Detected]

AHCI Port4 [Not Detected]

AHCI Port5 [Not Detected]

AHCI Port6 [Not Detected]

Some SATA CD/DVD in AHCI mode need to wait ready longer.

AHCI CD/DVD Boot Time out [15]

Selects the boot time out value for AHCI CD/DVD devices.

Congifuration options: [0] [5] [10] [15] [20] [25] [30] [35]

AHCI Port1~6 [XXXX]

Displays the status of auto-detection of SATA devices.

 

AHCI Port1

 

 

 

 

Device

:Not Detected

 

Select the type

 

 

of devices connected

 

 

 

 

 

SATA Port1

 

[Auto]

to the system.

 

 

 

 

SMART Monitoring

[Enabled]

 

 

 

 

 

 

SATA Port1 [Auto]

Allows you to select the type of device connected to the system. Configuration options: [Auto] [Not Installed]

SMART Monitoring [Enabled]

Allows you to set the Self-Monitoring, Analysis and Reporting Technology. Configration options: [Disabled] [Enabled]

4-16

Chapter 4: BIOS setup