2.9Connecting cables

The TW300-E5/PI4 chassis includes the power and signal cables that you need to connect to the motherboard, storage drives, and other devices that you intend to install.

• The bundled system cables are pre-connected before shipment. You do not need to disconnect these cables unless you will remove pre-installed components to install additional devices.

•Refer to Chapter 3 for detailed information on the connectors.

 

2

 

 

 

 

 

 

1

 

 

8

 

5

 

 

 

 

 

 

 

 

6

 

 

3

4

7

 

Standard cables connected to the motherboard

1.

24-pin ATX 12V power plug

5.

IDE signal cable

2.

4-pin ATX 12V power plug

6.

Serial ATA signal cables

3.

Card Reader cable

 

7.

System panel cable

4.

Front panel USB 2.0 cable

8.

System fan cable

2-26

Chapter 2: Hardware setup