2.5Installing hard disk drives

The server system supports four Serial ATA hard disk drives through screw-free hard disk drive holders.

To install a Serial ATA hard disk drive

1.Follow the instruction in section

2.1.2 Removing the right side cover to remove the right side cover.

2.Slightly push inward the HDD holder handles to release the HDD holder lock from the HDD bay, as shown in the right figure.

3.Carefully pull the HDD holder out of the HDD bay, as shown in the right figure.

4.Locate the four pin caps on the HDD holder. Align one side of the HDD screw holes to one side of the cage pin caps, as shown in the right figure.

2

2

3

4

Pin cap

5.Follow the direction of the arrow in the right figure and slightly bend the HDD holder.

ASUS TW300-E5/PI4

2-13