III. INSTALLATION

DIMM Memory Installation Procedures

Insert the module(s) as shown. Because the number of pins are different on either side of the breaks, the module will only fit in the orientation as shown. DIMM modules are longer and have different pin contact on each side and therefore have a higher pin density. SIMM modules have the same pin contact on both sides.

Lock

Pins 20 Pins 60

X G - D L S

Pins 88

Lock

XG-DLS 168-Pin DIMM Memory Sockets

The DIMMs must be 3.3V Unbuffered for this motherboard. To determine the DIMM type, check the notches on the DIMMs (see figure below).

168-Pin DIMM Notch Key Definitions (3.3V)

System Memory

III. INSTALLATION

DRAM Key Position

Voltage Key Position

RFU

Unbuffered

5.0V

Reserved

Buffered

 

3.3V

The notches on the DIMM will shift between left, center, or right to identify the type and also to prevent the wrong type from being inserted into the DIMM slot on the motherboard. You must tell your retailer the correct DIMM type before purchasing. This motherboard supports four clock signals.

ASUS XG-DLS User’s Manual

17