III.INSTALLATION
3.Central Processing Unit (CPU)
This motherboard provides two Single Edge Contact (SEC) Slot 2 connectors for either one or two Intel® Xeon™ processors packaged in an SEC cartridge. When only one processor is used, the other Slot 2 connector must be terminated with the provided front side bus termination module.
NOTE: The pictures in the following pages will have the same item numbers next to them for your reference. The following pictures are for reference only and are not to size. The design and color of your items may be slightly different.
You should check to see that you have the following items with your motherboard:
(Item 1) Metal Baseboard x 1 | (Item 6) Retention Mechanism Brace Bar x 2 |
(Item 2) Rubber Pad x 1 | (Item 7) Front Side Bus Termination Module |
(Item 3) Retention Mechanism x 2 | (Item 8) Retention Mechanism Cap x 2 |
|
NOTE: For the retention mechanism and lock bar, there is a left and a right side. The left side has a single dot and the right side has two dots (when holding the motherboard with the ATX connectors to the left).
(Item 4) Captive | (Item 5) Cartridge |
|
Nut x 15 (in bag) | Lifter x 4 | (Item 9) Retention Mechanism Support Frame x 2 |
18 | ASUS |