III.INSTALLATION

3.Parallel Printer Connector (25-pin Female)

You can enable the parallel port and choose the IRQ through “Onboard Parallel Port” in Chipset Features Setup of the BIOS SOFTWARE. NOTE: Serial print- ers must be connected to the serial port.

Parallel Port (25-pin Female)

4.Serial Port COM1 and COM2 Connectors (Two 9-pin Male)

The two serial ports can be used for pointing devices or other serial devices. See “Onboard Serial Port...” in Chipset Features Setup of the BIOS SOFTWARE.

COM 1COM 2

Serial Ports (9-pin Male)

5.RJ-45 Connector (8-pin Female)

This connector can be used to connect the onboard 32-bit 10/100 Mbps Ethernet LAN Controller (optional) to a host or a hub.

RJ-45 Connector

Ethernet Port

INSTALLATION

Connectors

III.

 

 

 

ASUS XG-DLS User’s Manual

27