Asus XG-DLS ASUS XG-DLSUser’s Manual, 12.SB-Link™Connector (6-1pin SBLINK), 11.IrDA-Compliantinfrared module connector (5-pinIR)

III.INSTALLATION

11.IrDA-Compliant infrared module connector (5-pin IR)

This connector supports the optional wireless transmitting and receiving infrared module. This module mounts to a small opening on system cases that support this feature. You must also configure the setting through “UART2 Use Infrared” in Chipset Features Setup to select whether UART2 is directed for use with COM2 or IrDA. Use the five pins as shown on the Back View and connect a ribbon cable from the module to the motherboard according to the pin definitions.

	IRRX	Front View	Back View
+5V		IRTX
	(NC)	GND
X G - D L S
			IRTX	+5V
			GND	(NC)
			IRRX
		For the infrared feature to be available,
		you must connect the optional Infrared
		(IrDA) module to the motherboard

XG-DLS Infrared Module Connector

12.SB-Link™ Connector (6-1 pin SBLINK)

Using Intel’s PC-PCI and serialized IRQ protocols found in this motherboard’s AGPset, this connector allows Sound Blaster 16 compatibility to AWE64D (Digi- tal) or other PCI audio cards, enabling users to play Real-mode DOS games and multimedia applications. SB-Link acts as a bridge between the motherboard and the PCI audio card by providing the DMA and IRQ signals present in the ISA bus but not available on the PCI bus.

	NOTE: Pin 3 is removed to ensure the
	correct orientation of the cable on it.
		PC/PCI Request
X G - D L S		Sideband Signal
	2
			4	6	Serial IRQ
	DGND
	PC/PCI Grant				DGND
	Sideband Signal

1 5

XG-DLS SB-LINK™ Connector

INSTALLATION	Connectors
III.

ASUS XG-DLS User’s Manual 31