INSTALLATION .III

Connectors

III.INSTALLATION

6.Universal Serial BUS Ports 1 & 2 (Two 4-pin Female) Two USB ports are available for connecting USB devices.

USB 1

USB 2

Universal Serial Bus (USB)

7.Floppy Disk Drive Connector (34-1pin FLOPPY)

This connector supports the provided floppy disk drive ribbon cable. After con- necting the single end to the board, connect the two plugs on the other end to the floppy drives. (Pin 5 is removed to prevent inserting in the wrong orienta- tion when using ribbon cables with pin 5 plugged.)

NOTE: Orient the red stripe to Pin 1

Floppy Drive Connector

X G - D L S

Pin 1

XG-DLS Floppy Disk Drive Connector

8.Activity LED (2-pins HDLED)

This connector supplies power to the cabinet’s activity LED. Read and write activity by devices connected to the Primary IDE, Secondary IDE, or SCSI con- nectors will cause the LED to blink.

TIP: If the case-mounted LED does not light, try reversing the 2-pin plug.

X G - D L S

XG-DLS Activity LED

28

ASUS XG-DLS User’s Manual