Mount the base on the wall, Check for dial tone | AT&T 1480 guide

1480_book_1ATT 2/25 2/25/02 10:30 AM Page 6

INSTALLATION

7Connect the corded handset to the base.

8Connect the telephone line cord to the modular telephone jack.

9Plug the power cord into the electrical outlet.

The ANSWER ON/OFF light goes on, and CL flashes in the Message Window.

Use only the power cord supplied with this product. If you need a replacement, call 1 800 222–3111.

10 Mount the base on the wall.

a) Align holes on base with mounting studs on wall jack.

b)Pull base down on mounting studs until it locks into place.

11Check for dial tone.

Lift the handset; you should hear a dial tone.

6

Image 9

AT&T 1480 user manual Mount the base on the wall, Check for dial tone

Contents

Part 1 Important Product Information Draft 2/25/02 Advanced American Telephones. All rights reserved Contents About the Base and the Charger Before YOU BeginChoosing the Best Location About Caller ID with Call Waiting About Call History Installation Base InstallationTable/Desk Wall Mount Installation Mount the base on the wall Install the handset battery Handset Charger Installation Set the phone for tone or pulse dialing base only Charge the handset battery Headset Belt Clip Telephone Operation Telephone Operation Temporary Tone Dialing Base or Handset Handset Ringer Style/Battery Save Display Screen Messages Handset and Base Operating Range Store a Number/Name in the Directory Telephone Directory Edit Dial Erase Edit a Number/Name Stored in the Directory Dial a Number from the Directory Delete a Number/Name Stored in the Directory Review Call History Caller ID Operation Dial a Displayed Number Delete Records from Call HistoryDelete a Specific Call Delete All Calls Turn Off the Base NEW Call Indicator Store a Call History Record in the DirectoryDisplay Screen Messages Answering System Operation Audible IndicatorsSet the Clock About Mailboxes Press Uuntil you hear Change announcement Record Your Announcement Feature Summary Answering System Feature Setup Adjust Playback Volume Listen to, Save & Delete MessagesPlay Messages Call Screening/Intercept Record a MemoMessage Window Display Remote Access Commands Connect with the Answering SystemVoice Menu Record memo End remote access callTurn system off Turn system on Batteries Charge the Handset Battery Pack Replacing the Handset Battery Pack If the phone does not ring when you receive a call Case of DifficultyIf the phone doesn’t work at all, check these items first If you lose a call after changing channels If you hear other calls while using your phone If messages are incomplete If you have difficulty hearing messagesIf CL appears in the Message Window If callers cannot leave messages in Mailbox 2 or If your outgoing announcement isn’t clear Answering System Remote Commands Machine off press #0again Press