Handset Ringer Style/Battery Save | AT&T 1480 manual

1480_book_1ATT 2/25 2/25/02 10:30 AM Page 12

TELEPHONE OPERATION

AT THE HANDSET

Handset Ringer Style/Battery Save

You can select from four different handset ringer styles, or turn the ringer off and extend the battery life.

1Make sure the handset is off.

2Press G to enter programming mode.

3Press > until the screen displays RINGER:.

4Press S. The screen displays the current setting.

5Press < or > to select 1, 2, 3, 4, or OFF. You will hear a sample of each ring.

6Press S to choose the displayed ringer setting.

Temporary Tone Dialing (Base or Handset)

If you have dial pulse (rotary) service, you can change from dial pulse to touch tone dialing during a call by pressing *. This is useful if you need to send touch tone signals for access to telephone banking or long-distance services.

1Dial the number.

2Press *. Buttons pressed after this send touch tone signals.

3After you hang up, the phone automatically returns to dial pulse (rotary) service.

Headset

You can use this telephone with any industry standard 2.5 mm headset (purchased separately). For best results, use an AT&T 2.5 mm headset.

Plug the headset into the jack located on the left side of the handset (under the small rubber flap) or into the jack on the right side of the base Do not force the connection, but make sure the plug fits securely.

12

Image 15

AT&T 1480 user manual Handset Ringer Style/Battery Save, Temporary Tone Dialing Base or Handset

Contents

Part 1 Important Product Information Draft 2/25/02 Advanced American Telephones. All rights reserved Contents About Caller ID with Call Waiting Before YOU BeginAbout the Base and the Charger Choosing the Best Location About Call History Installation Base InstallationTable/Desk Wall Mount Installation Mount the base on the wall Install the handset battery Handset Charger Installation Set the phone for tone or pulse dialing base only Charge the handset battery Headset Belt Clip Telephone Operation Telephone Operation Temporary Tone Dialing Base or Handset Handset Ringer Style/Battery Save Display Screen Messages Handset and Base Operating Range Store a Number/Name in the Directory Telephone Directory Edit Dial Erase Edit a Number/Name Stored in the Directory Dial a Number from the Directory Delete a Number/Name Stored in the Directory Review Call History Caller ID Operation Delete All Calls Delete Records from Call HistoryDial a Displayed Number Delete a Specific Call Turn Off the Base NEW Call Indicator Store a Call History Record in the DirectoryDisplay Screen Messages About Mailboxes Audible IndicatorsAnswering System Operation Set the Clock Press Uuntil you hear Change announcement Record Your Announcement Feature Summary Answering System Feature Setup Adjust Playback Volume Listen to, Save & Delete MessagesPlay Messages Call Screening/Intercept Record a MemoMessage Window Display Remote Access Commands Connect with the Answering SystemVoice Menu Turn system on End remote access callRecord memo Turn system off Batteries Charge the Handset Battery Pack Replacing the Handset Battery Pack If the phone does not ring when you receive a call Case of DifficultyIf the phone doesn’t work at all, check these items first If you lose a call after changing channels If you hear other calls while using your phone If messages are incomplete If you have difficulty hearing messagesIf CL appears in the Message Window If callers cannot leave messages in Mailbox 2 or If your outgoing announcement isn’t clear Answering System Remote Commands Machine off press #0again Press