26
Remote Access Commands (continued)

Function: Command:

Record memo Press *8;then mailbox number where
you want memo recorded;speak after
beep;press #5to exit.
End remote access call Press *0.
Turn system off Press #0;the system announces,
“Machine off.” Press #0again to turn
the system back on.
Turn system on When system is off,it answers after 10
rings and announces,“Please enter your
remote access code.” Press #, then enter
your remote access code.
NOTE: The remote access call will automatically end if 20 seconds
go by with no key being pressed (other than when recording or playing
messages or announcements).
ANSWERING SYSTEM OPERATION
AT TOUCH TONE PHONE
1480_book_1ATT 2/25 2/25/02 10:30 AM Page 26