Replacing the Handset Battery Pack | AT&T 1480 instruction

1480_book_1ATT 2/25 2/25/02 10:30 AM Page 28

BATTERIES

Replacing the Handset Battery Pack

1Remove the battery compartment cover on the handset by pressing on the indentation and sliding the cover downward.

2Lift out the old battery pack and disconnect.

3Align the two holes in the new battery pack’s plug with the socket pins, and snap the plug into place. Place the battery pack in the compartment with the wires in the lower left corner, along the bottom of the battery pack.

4Replace the cover by sliding it up into place.

5The new battery pack must be charged before using the phone. Place the handset in the base and allow it to charge for at least

12 hours the first charge. The telephone might operate before that, but for best performance, let the battery pack charge fully.

28

Image 31

AT&T 1480 user manual Replacing the Handset Battery Pack

Contents

Part 1 Important Product Information Draft 2/25/02 Advanced American Telephones. All rights reserved Contents About Caller ID with Call Waiting Before YOU BeginAbout the Base and the Charger Choosing the Best Location About Call History Base Installation InstallationTable/Desk Wall Mount Installation Mount the base on the wall Install the handset battery Handset Charger Installation Set the phone for tone or pulse dialing base only Charge the handset battery Headset Belt Clip Telephone Operation Telephone Operation Temporary Tone Dialing Base or Handset Handset Ringer Style/Battery Save Display Screen Messages Handset and Base Operating Range Store a Number/Name in the Directory Telephone Directory Edit Dial Erase Edit a Number/Name Stored in the Directory Dial a Number from the Directory Delete a Number/Name Stored in the Directory Review Call History Caller ID Operation Delete All Calls Delete Records from Call HistoryDial a Displayed Number Delete a Specific Call Store a Call History Record in the Directory Turn Off the Base NEW Call IndicatorDisplay Screen Messages About Mailboxes Audible IndicatorsAnswering System Operation Set the Clock Press Uuntil you hear Change announcement Record Your Announcement Feature Summary Answering System Feature Setup Listen to, Save & Delete Messages Adjust Playback VolumePlay Messages Record a Memo Call Screening/InterceptMessage Window Display Connect with the Answering System Remote Access CommandsVoice Menu Turn system on End remote access callRecord memo Turn system off Batteries Charge the Handset Battery Pack Replacing the Handset Battery Pack Case of Difficulty If the phone does not ring when you receive a callIf the phone doesn’t work at all, check these items first If you lose a call after changing channels If you hear other calls while using your phone If you have difficulty hearing messages If messages are incompleteIf CL appears in the Message Window If callers cannot leave messages in Mailbox 2 or If your outgoing announcement isn’t clear Answering System Remote Commands Machine off press #0again Press