INTERCOM/TRANSFER Operation, Handset to Handset | AT&T 2455 manual

INTERCOM/TRANSFER OPERATION

Handset to Handset

1Press Ion the handset.

2Press the number of the handset you are calling (for example, press 2for Handset 2)

— OR —

Use the softkeys to scroll to the handset you are calling, then select OK.

12

GLOBAL PAGE

HANDSET 1

OK

3The responding handset presses Ito answer your signal.

4To end the intercom connection, press Oon either handset.

Handset to All Handsets

1Press Ion the handset.

2Press *on the handset

— OR —

Use the softkey to select OK when GLOBAL PAGE is highlighted. All registered handsets will ring.

3Respond at any handset by pressing I.

4To end the intercom connection, press Oon the handset.

Transfer Calls

You can transfer calls from handset to handset. A transfer that remains unanswered for five minutes rings back to the sending handset for 30 seconds, then disconnects.

Blind Transfer

Transfer without advising the other person.

1Press I.

2Enter the handset number (1, 2, 3, 4) where you want to transfer the call

— OR —

Use the softkeys to scroll to the handset where you want to transfer the call, then select OK.

3The call is transferred when the responding handset presses I, P, or k.

18

Image 20

AT&T 2455 INTERCOM/TRANSFER Operation, Handset to Handset, Handset to All Handsets, Transfer Calls, Blind Transfer

Contents

With Caller ID/Call Waiting Advanced American Telephones. All rights reserved Contents Page Using More Than One Handset Before YOU BeginChoosing the Best Location About Caller ID with Call Waiting Installation Connect the telephone line cord Set the dial mode switch Check for dial tone Belt Clip Headset Handset Softkeys Feature SettingsTelephone Feature Setup Handset Features Low Batt ToneRange Tone Keypad Tone Telephone Operation Volume MuteHold Line in Use Handset Icons Page/Handset Locator Operating Range Telephone Directory Store a Number and Name in Memory View a Memory Number Delete a Memory Number Edit a Memory Number Dial a Memory Number INTERCOM/TRANSFER Operation Handset to HandsetHandset to All Handsets Transfer Calls Announced Transfer Dial Displayed Call Record Caller ID OperationView Calls Log Delete Call Records Display Dial Options Store Call Record in Telephone Memory Audible Indicators Answering System OperationAbout Mailboxes About Announcements Record Your Announcement Press Uuntil you hear Set outgoing message Answering System Feature Setup Feature Summary Listen To, Save & Delete Messages Delete Messages Message Window Display Call Screening/InterceptRecord a Memo Connect with the Answering System Voice Menu Remote Access Commands Function Command Batteries Battery LifeCharge the Handset Battery Pack Replace the Handset Battery Pack Power Fail Operation Spare Battery Case of Difficulty If the phone does not work at all, check these items firstIf you have no dial tone To re-initialize the handset and base If you hear noise or interference when using the phone If the phone does not ring when you receive a callIf your telephone misdials If the caller’s name or phone number is not displayed Remote Commands Answering System Press Machine is off press #0again