Volume, Mute, Hold, Line in Use | AT&T 2455 specification

TELEPHONE OPERATION

Volume

1During a call, select VOLUME, then use the softkeys to adjust the earpiece volume.

2Select OK to save the setting for future calls.

Mute

Mute allows you to hear your caller, but prevents the caller from hearing you.

1Use the softkey to select MUTE. The screen alternately displays

MICROPHONE MUTED! and the previous screen.

2Select MUTE again to return to your conversation.

Hold

When you put a call on hold, you cannot hear your caller, and your caller cannot hear you.

1Use the softkey to select HOLD. The screen displays

CALL ON HOLD.

2Press Por kto return to the call.

NOTE: The handset rings to remind you that the call is being held. If you don’t answer the ring, the call is disconnected.

Line in Use

•When the line is in use by a handset or base, the screen display is similar to:

•When the line is in use by another set on the same line, the screen displays:

2

02 NEW CALLS

RDL MENU MEM

EXTENSION

IN USE!!

VOL MENU MUTE

10

Image 12

AT&T 2455 user manual Volume, Mute, Hold, Line in Use

Contents

With Caller ID/Call Waiting Advanced American Telephones. All rights reserved Contents Page Using More Than One Handset Before YOU BeginChoosing the Best Location About Caller ID with Call Waiting Installation Connect the telephone line cord Set the dial mode switch Check for dial tone Belt Clip Headset Feature Settings Telephone Feature SetupHandset Softkeys Handset Features Low Batt ToneRange Tone Keypad Tone Telephone Operation Volume MuteHold Line in Use Handset Icons Page/Handset Locator Operating Range Telephone Directory Store a Number and Name in Memory View a Memory Number Delete a Memory Number Edit a Memory Number Dial a Memory Number INTERCOM/TRANSFER Operation Handset to HandsetHandset to All Handsets Transfer Calls Announced Transfer Caller ID Operation View Calls LogDial Displayed Call Record Delete Call Records Display Dial Options Store Call Record in Telephone Memory Audible Indicators Answering System OperationAbout Mailboxes About Announcements Record Your Announcement Press Uuntil you hear Set outgoing message Answering System Feature Setup Feature Summary Listen To, Save & Delete Messages Delete Messages Call Screening/Intercept Record a MemoMessage Window Display Connect with the Answering System Voice Menu Remote Access Commands Function Command Battery Life Charge the Handset Battery PackBatteries Replace the Handset Battery Pack Power Fail Operation Spare Battery Case of Difficulty If the phone does not work at all, check these items firstIf you have no dial tone To re-initialize the handset and base If you hear noise or interference when using the phone If the phone does not ring when you receive a callIf your telephone misdials If the caller’s name or phone number is not displayed Remote Commands Answering System Press Machine is off press #0again