Belt Clip, Headset | AT&T 2455 specs

INSTALLATION

Belt Clip

Attach belt clip to the cordless handset (optional).

a) Slide down into	b) Push up and away
grooves to attach.	to remove.

Headset

You can use this telephone hands-free when you install a 2.5 mm headset (purchased separately).

Plug the headset into the jack located on the left side of the handset (under the small rubber flap). Do not force the connection, but make sure the plug fits securely.

6

Image 8

AT&T 2455 user manual Belt Clip, Headset

Contents

With Caller ID/Call Waiting Advanced American Telephones. All rights reserved Contents Page Using More Than One Handset Before YOU BeginChoosing the Best Location About Caller ID with Call Waiting Installation Connect the telephone line cord Set the dial mode switch Check for dial tone Belt Clip Headset Handset Softkeys Feature SettingsTelephone Feature Setup Handset Features Low Batt ToneRange Tone Keypad Tone Telephone Operation Volume MuteHold Line in Use Handset Icons Page/Handset Locator Operating Range Telephone Directory Store a Number and Name in Memory View a Memory Number Delete a Memory Number Edit a Memory Number Dial a Memory Number INTERCOM/TRANSFER Operation Handset to HandsetHandset to All Handsets Transfer Calls Announced Transfer Dial Displayed Call Record Caller ID OperationView Calls Log Delete Call Records Display Dial Options Store Call Record in Telephone Memory Audible Indicators Answering System OperationAbout Mailboxes About Announcements Record Your Announcement Press Uuntil you hear Set outgoing message Answering System Feature Setup Feature Summary Listen To, Save & Delete Messages Delete Messages Message Window Display Call Screening/InterceptRecord a Memo Connect with the Answering System Voice Menu Remote Access Commands Function Command Batteries Battery LifeCharge the Handset Battery Pack Replace the Handset Battery Pack Power Fail Operation Spare Battery Case of Difficulty If the phone does not work at all, check these items firstIf you have no dial tone To re-initialize the handset and base If you hear noise or interference when using the phone If the phone does not ring when you receive a callIf your telephone misdials If the caller’s name or phone number is not displayed Remote Commands Answering System Press Machine is off press #0again