Replace the Handset Battery Pack | AT&T 2455 specs

BATTERIES

Nickel-Metal Hydride Batteries. Dispose of batteries in a safe manner. Consult your local waste disposal company for disposal information. Do not burn or puncture. Like other batteries of this type, if burned it could explode and if punctured it could release corrosive material which could injure the skin or eyes and which may be toxic.

Replace the Handset Battery Pack

1Install the handset battery.

a)Remove battery compartment cover by

pressing on indentation and sliding downward.

b) Place the battery pack in the

handset. Align the metal contacts on the battery with the contacts in the battery compartment.

c)Replace cover by sliding it on its track up over battery case until it snaps firmly into place.

2Charge the handset battery.

•Place the handset in the base (or a remote charging stand, purchased separately)

•Charge the battery at least 12 hours. After the first charge, the battery will quick charge in only eight hours.

31

Image 33

AT&T 2455 user manual Replace the Handset Battery Pack

Contents

With Caller ID/Call Waiting Advanced American Telephones. All rights reserved Contents Page Before YOU Begin Using More Than One HandsetChoosing the Best Location About Caller ID with Call Waiting Connect the telephone line cord Set the dial mode switch Installation Check for dial tone Headset Belt Clip Feature Settings Telephone Feature SetupHandset Softkeys Low Batt Tone Handset FeaturesRange Tone Keypad Tone Telephone Operation Mute VolumeHold Line in Use Handset Icons Page/Handset Locator Operating Range Store a Number and Name in Memory Telephone Directory View a Memory Number Delete a Memory Number Dial a Memory Number Edit a Memory Number Handset to Handset INTERCOM/TRANSFER OperationHandset to All Handsets Transfer Calls Announced Transfer Caller ID Operation View Calls LogDial Displayed Call Record Display Dial Options Delete Call Records Store Call Record in Telephone Memory Answering System Operation Audible IndicatorsAbout Mailboxes About Announcements Press Uuntil you hear Set outgoing message Record Your Announcement Feature Summary Answering System Feature Setup Delete Messages Listen To, Save & Delete Messages Call Screening/Intercept Record a MemoMessage Window Display Voice Menu Connect with the Answering System Function Command Remote Access Commands Battery Life Charge the Handset Battery PackBatteries Replace the Handset Battery Pack Spare Battery Power Fail Operation If the phone does not work at all, check these items first Case of DifficultyIf you have no dial tone To re-initialize the handset and base If the phone does not ring when you receive a call If you hear noise or interference when using the phoneIf your telephone misdials If the caller’s name or phone number is not displayed Answering System Remote Commands Machine is off press #0again Press