AT&T 3658B user manual Blind Call Transfer, From the Handset

ATT3658B manual-updated 5/19/04 5:34 PM Page 34

INTERCOM OPERATION

Blind Call Transfer

You can transfer a call from one handset to another.

From the Handset

1 Press XFER , then use to highlight where you want the call transferred.

2When the desired destination is highlighted,

					press	OK	to transfer the call.
				NOTE: An unanswered call will ring back to the
				originating handset if not answered within 30
				seconds. If the originating handset does not pick up
				the call within 30 seconds, the call will be
				disconnected.
				Announced Call Transfer
				1	Press	HOLD	to put the call on hold.
				2	Press	MENU	, then use	to highlight
					INTERCOM.		Press OK	, then use	to
					highlight call destination, then press				OK
					again.
				3	When the handset or base answers, announce
					the caller.
				4	Press Oon the handset or Kon the
					base to end the intercom call.
				5	Press P(on the receiving handset) or
					K(on the receiving base) to pick up the
					call on hold.
8B

34