Installation, Install the handset battery | AT&T 3658B specification

ATT3658B manual-updated 5/19/04 5:34 PM Page 4

INSTALLATION

3Install the handset battery.

Use only AT&T Battery 2401, SKU# 91077.

a) Remove battery	b) Align the contacts and place
compartment cover by	the battery pack in the
pressing on indentation	battery compartment.
and sliding downward.

c) Replace cover by sliding it on its track up over battery case until it snaps firmly into place.

4Charge the handset battery.

•Place the handset in the base or remote charger.

•Charge the battery at least 12 hours. After the first charge, the battery will charge in eight hours.

5Check for dial tone.

•After the batteries are charged, lift the handset and press P; you should hear a dial tone.

4

Image 7

AT&T 3658B user manual Installation, Install the handset battery, Charge the handset battery, Check for dial tone

Contents

Part 1 Important Product Information With Caller ID/Call Waiting Advanced American Telephones. All Rights Reserved Contents YOU Parts ListBefore YOU Begin About Adding Handsets Beforeyou BegininAbout Caller Identification Caller ID About the Calls Log Installation InstallationiTable/Desk Installation Check for dial tone InstallationInstall the handset battery Charge the handset battery Register an Additional Handset Model 5800 Handset About Handset Registration Follow Steps 3-5 in Table/Desktop Installation Wall Installation Spare Battery/Power Failure Backup Installationi Headset Belt Clip Set Time Feature Setup HandsetFeature Setup Handset Feature Setup Menu Register Clock Mode Sound Select Ringer Volume Ringer Melody Ringer #01 Low Batt Tone Range Tone Keypad Tone Set Contrast Language Setting Feature Setup Base Feature Setup BaseRelease Mto save your setting Answer a Call Telephone OperationTelephone Operation Make a Call Handset VolumeBase Speaker Answer a Call Switch Between Handset and SpeakerphoneHandset Speakerphone Make a Call Save a Redial Number RedialDelete a Redial Number Base Flash/Call Waiting Mute Hold Screen Displays When Display Screen Messages This Icon Indicates Handset Icons Light Status Indicates Base Lights Tone Indicates Tones and What They Mean Intercom Operation Intercom OperationIntercom Calls End Intercom OperationIntercom Answering Intercom From the Handset Blind Call Transfer Conference Calling Phone Book Phone BookStore a Number and Name in Phone Book Keypad Characters Dial a Number in Phone Book Edit a Number/Name in Phone Book George Delete a Number/Name in Phone Book Caller ID Operation Caller Idid Operationi Store Record in Phone Book Review Calls LogFor example Dialing Options Display Dial Removing a Specific Call Record Remove Call RecordsRemoving All Records Turn Answering System On/Off Audible IndicatorsSet the Clock About Mailboxes Answering System OperationAbout Announcements To delete your announcement RecordYour Announcement Make sure the answering system is on Answering System Feature Setup Feture Summary Play Messages Listen to, Save & Delete MessagesDelete Messages Call Screening/Intercept Adjust Playback Volume Record a Memo Window Displays When Message Window Display Voice Menu Connect with the Answering System Function Command Remote Access Commands Batteriesi Battery LifeBattery Indicator Charge the Handset Battery Pack Batteries Spare Battery Replace the Handset Battery Pack Case of Difficulty DifficultyiPhone Handset on page 5 of this manual Problem SolutionIf you hear noise or interference when using the phone To re-initialize the handset and base Inin Case of Difficultyi If the phone does not ring when you receive a call If the caller’s name or phone number is not displayed Caller ID Incomplete Case of DifficultyiAnswering System If messages are TV, music, etc. while you are recording Respond to commandsIf the system does not From a remote touch Function Default Setting Default SettingsDefault Settings Default Settings Technical Specifications Technicali SpecificationsiTechnical Specifications Index Indexi Mute Save 9, 36, 39