ATT3658B
REMOTE ACCESS COMMANDS
FUNCTION: | COMMAND: |
Play messages | Press #, then enter the appropriate |
in a mailbox | mailbox number(1, 2, or 3). The system |
| plays new messages. If there are no new |
| messages, the system plays old messages. |
|
|
Repeat a message | Press #4while message is playing; press # |
| 4twice back up another message. |
|
|
Skip a message | Press #6while message is playing; each |
| press advances another message. |
|
|
Stop | Press #5. |
|
|
Save messages | Hang up. |
|
|
Delete message | Press #9while message is playing. |
|
|
Review announcement | Press #7; system plays announcement, |
| then beeps. |
|
|
Record announcement | Press *7; after beep, record |
| announcement, press #5to stop. |
| System plays back announcement. |
|
|
Record memo | Press *8; then mailbox number where |
| you want memo recorded; speak after beep; |
| press #5to exit. |
|
|
End remote access call | Press *0. |
|
|
Turn system off | Press #0; the system announces,“Machine |
| off.” Press #0again to turn |
| the system back on. |
|
|
Turn system on | When system is off, it answers after 10 rings |
| and announces,“Please enter your remote |
| access code.” Enter your remote access |
| code. |
|
|
NOTE: If no key is pressed within 10 seconds of entering remote access code, the voice menu will be announced. After the voice menu announcement, if no key is pressed within 20 seconds, the remote access call will automatically end.
ANSWERING SYSTEM OPERATION
55
