3
Installing the Fibre Channel to SCSI Router for the NonStop NS-Series Server
This section includes:
Installation
1.Connect the small end of the SCSI cable to the Fibre Channel to SCSI router on port 0. For the port location, see Figure
Note. In this example port 0 is being used to connect the tape drive. Both ports on the Fibre Channel to SCSI router are available for use if needed.
Table
Product | Part |
|
Number | Number | Description |
CBA, 1 meter, VHDCI 68P to HD 68P, HVD SCSI Cable | ||
CBA, 3 meter, VHDCI 68P to HD 68P, HVD SCSI Cable | ||
CBA, 10 meter, VHDCI 68P to HD 68P, HVD SCSI Cable | ||
CBA, 15 meter, VHDCI 68P to HD 68P, HVD SCSI Cable | ||
CBA, 20 meter, VHDCI 68P to HD 68P, HVD SCSI Cable | ||
CBA, 23 meter, VHDCI 68P to HD 68P, HVD SCSI Cable | ||
|
|
|
M8201R Fibre Channel to SCSI Router Installation and User’s