5
Troubleshooting the Fibre Channel to SCSI Router
This section includes:
This section guides the user through some of the basic methods of identifying faults in the setup and configuration of the unit.
Most problems occur in the initial installation. In general, it is wise to check all connections and review the configuration before proceeding with further trouble analysis. Simplify the installation if possible, reducing it to the most basic configuration. Then add elements one at a time and verify the operation at each step.
Visual Inspection
To assure that the installation of the Fibre Channel to SCSI router has been completed correctly:
1.Check that all devices are powered up.
2.Check that all cords are plugged in tightly, and there are no bent pins.
3.Check the LEDs. No amber lights should be illuminated.
4.Check the fiber cables to ensure the connectors are properly installed between the Fibre Channel to SCSI router and the server.
5.Check that each device has the correct SCSI ID.
Technical Support
If the Fibre Channel to SCSI router is not functioning properly, contact your service provider.
M8201R Fibre Channel to SCSI Router Installation and User’s