C

Configuring OSM for Monitoring the Fibre Channel to SCSI Router

This section includes the steps that are needed to configure OSM so that it can monitor the Fibre Channel to SCSI router.

To configure OSM for monitoring the router complete these three basic steps:

1.Connect the router to the LAN connection on the system.

2.Configure the router's IP address, user name, and password.

3.Configure the router for OSM monitoring.

You need these components:

•

•

•

•

A M8201R Fibre Channel to SCSI router

A system console with a hyper terminal installed

A serial cable

A system console with a serial cable port

Connecting the Hardware

To connect the router to the LAN connection on the system, make these connections to the Fibre Channel to SCSI router:

1.Connect the router to the FCSA on the system by using a fiber-optic cable.

2.Connect the tape drive to the router by using a SCSI cable.

Note. For more information on connecting the router and tape drive to the system, see Installing the Fibre Channel to SCSI Router for the NonStop NS-Series Server on page 3-1.

3.Connect a serial cable to the system, and then connect the other end of the cable to the serial port on the router.

Note. For more information on connecting the serial cable to the system, see Using the Serial Interface on page B-1.

M8201R Fibre Channel to SCSI Router Installation and User’s Guide—529971-005

C-1