Using the Serial Interface | Ethernet Configuration |
Ethernet Configuration
This option allows for setting up all Ethernet network settings, including IP address, Subnet mask, IP gateway, SNMP and security settings, Ethernet mode, physical address, and host name.
Figure
Ethernet Configuration Menu
X.XX.XX XXXXXX
01/06/2003 08:56:22
IP Address | : 192.231.36.101 |
Subnet Mask | : 255.255.255.0 |
IP Gateway | : 0.0.0.0 |
Ethernet Physical Address | : 08:06:07:05:03:09 |
Ethernet Mode | : 10/100Mbps |
Hostname | : |
DHCP Configuration | : Disabled |
1)Change IP Address
2)Change IP Subnet Mask
3)Change IP Gateway
4)Change Ethernet Physical Address
5)Toggle Ethernet Mode
6)Change Hostname
7)Toggle DHCP Configuration
8)Change SNMP Settings
9)Change Security Settings
X) Return to previous menu
•Select 1 to change the IP address of the Fibre Channel to SCSI router. The default for this setting is 192.231.36.101.
•Select 2 to change the IP subnet mask for the Fibre Channel to SCSI router. The default for this setting is 255.255.255.0.
•Select 3 to change the IP gateway for the Ethernet network of the Fibre Channel to SCSI router.
•Select 4 to change the Ethernet physical address, or MAC address, of the Fibre Channel to SCSI router. Ethernet physical addresses are always assigned to Ethernet adapters by the manufacturers.
M8201R Fibre Channel to SCSI Router Installation and User’s