Installing the Fibre Channel to SCSI Router for the

Installation

NonStop NS-Series Server

 

3.Connect one end of the fiber cable to the small form-factor pluggable (SFP) on the unit. See Figure 3-3 for the location.

4.Attach the power cord to the AC power receptacle on the Fibre Channel to SCSI router. See Figure 3-3 for the location. Then plug the other end into an AC power outlet.

Note. The router does not have protection against lightning surges. Customers in high risk areas should use external surge protection rated for use in their location and be able to handle the power demand of the router.

Figure 3-2. Front View of the Fibre Channel to SCSI Router

Figure 3-3. Rear View of the Fibre Channel to SCSI Router

Power

 

Port 0

AC Power Switch

Small Form-Factor

Port 1

Receptacle

Pluggable (SFP)

 

 

 

 

M8201R Fibre Channel to SCSI Router Installation and User’s Guide—529971-005

3-3