4
Configuring the Fibre Channel to SCSI Router for the NonStop NS-Series Server
This section includes:
Configuration
1.In SCF, issue this command:
SCF> ADD TAPE $tape, SENDTO STORAGE, LOCATION (group, module, slot), SAC
Example:
SCF> ADD TAPE $TAPE1, SENDTO STORAGE, LOCATION (110,2,3), SAC 1, PORTNAME 100000E00C00F000, LUN 1
Note. The LUN (logical unit number) in SCF should be 1 for the tape drive that is on bus 0 and 3 for the tape drive that is on bus 1.
Note. PORTNAME in SCF corresponds to the WWP name of the router. This name is located on the back of the device.
The Fibre Channel to SCSI router can also be connected to a tape library.
Table
Table
DEVICE | SCSI ID | Router PORT | LUN ADDRESS |
Tape library | 3 | 0 | LUN 0 |
Tape drive | 5 | 0 | LUN 1 |
Tape library | 3 | 1 | LUN 2 |
Tape drive | 5 | 1 | LUN 3 |
|
|
|
|
M8201R Fibre Channel to SCSI Router Installation and User’s