COBY electronic MP-C951 instruction manual USB Driver Installation Required for Windows 98 SE Only

USB Port (mini)

USB CONNECTIONS

USB Driver Installation (Required for Windows 98 SE Only)

It is not necessary to install the USB driver if your computer is running Microsoft Windows ME/2000/XP or newer, or Macintosh OS X. Computers running these operating systems will rec- ognize your player automatically when connected.

If your computer is running Windows 98 SE:

1.Insert the Installation CD into your computer’s CD or DVD drive. Make sure to place the mini-CD in the center, recessed well of the drive tray.

2.Navigate to MY COMPUTER and double-click on the CD/DVD drive icon (usually “D:”).

3.Double-click on the folder “Win98 USB Drivers” and then on the folder “english”.

4.Double-click on the SETUP icon (SETUP.EXE) to start the USB driver installation program.

5.Follow the on-screen instructions to complete the installation and then restart your computer.

Note:

Mini-CDs should only be used in normal tray-loading CD/DVD drives. Mini-CDs may be used in slot-loading drives with the proper adapter; please contact your computer or drive manufacturer for more information.

Connecting to a Computer

To connect the player to your computer:

1.Connect the player to your computer with the supplied

USB cable as shown in the diagram.

• If the USB Charge option is set to OFF, continue to the next step.

USB Port (computer)

• If the USB Charge option is

set to ON, you may see the Battery Charge icon. Touch

to continue connecting to your computer.

2.Your computer will recognize the player as a Removable Disk.

Disconnecting from a Computer

Disconnect your player as instructed below to prevent data loss or corruption. If you are using a USB-MTP connection, you can simply disconnect the cable from your player.

Microsoft Windows

1.Double-click the green arrow in the taskbar located on the lower-right side of the computer screen (Safely Remove Hardware).

2.Select “USB Mass Storage Device” from the list that appears and then click on “Stop”.

3.Select “USB Mass Storage Device” from the list that appears and then click on “OK”.

4.Disconnect the USB cable from the player and your computer.

13