AT&T 6550G user manual Step

Configuring the Wireless Network — Windows® 2000

Windows® XP • Windows® 2000 • Windows® Me/98 SE

Step 9

When configuration is complete, you must re-start Windows®.

When Windows® restarts you will be prompted to enter a user name and password. Be sure to record these in a safe place. You will be required to enter them for access to the network each time you restart Windows®.

Step 10

To verify that configuration is complete, double- click the My Network Places icon on your desktop, then double-click Computers Near Me.

In the next window displayed you should see the names of all network computers.

If any computers do not appear, you will have to follow the steps in this section on each computer to configure them for network sharing. Make sure each computer is assigned a different name, and all share the same Workgroup name you entered at Step 8.

AT&T Plug&Share™ Wireless PCI Adapter 108 Mbps 6550G 21