Configuring the Wireless Network — Windows® 2000

Windows® XP • Windows® 2000 • Windows® Me/98 SE

Step 9

When configuration is complete, you must re-start Windows®.

When Windows® restarts you will be prompted to enter a user name and password. Be sure to record these in a safe place. You will be required to enter them for access to the network each time you restart Windows®.

Step 10

To verify that configuration is complete, double- click the My Network Places icon on your desktop, then double-click Computers Near Me.

In the next window displayed you should see the names of all network computers.

If any computers do not appear, you will have to follow the steps in this section on each computer to configure them for network sharing. Make sure each computer is assigned a different name, and all share the same Workgroup name you entered at Step 8.

AT&T Plug&Share22 Mbps Turbo Wireless Router 6800B4X

58

Page 58
Image 58
AT&T 6800B4X user manual Step