Operation during, Power failure, Screen displays | AT&T 974 guide

974CIB_06 4/7/06 3:33 PM Page 91

Telephone operation

Problem	Solution
Operation during	This phone will operate during a power
a power failure.	failure if a working battery has been installed.
	You will be able to answer calls with the
	handset or headset, and dial calls using the
	keypad and the one touch or redial features.
	No other features will work until power is
	restored. All programming is retained during
	power failure.

Problem	Solution
The screen displays	The phone has been disconnected from AC
Powerfail.	power. When power is restored, a key is
	pressed, or the phone is taken off the hook,
	the screen will return to the usual display.
	One touch and redial numbers are retained
	until power is restored.

Problem	Solution
Display screen	Make sure the power cord is connected
is blank.	to both the phone and an electrical outlet
	not controlled by a wall switch.

Problem	Solution
Intercom, hold, line	If you are a DSL customer, you may need
privacy or other	to arrange for installation of a splitter. See
advanced features do	DSL users beginning on page 4 for details.
not work properly.

Caller ID operation

Problem	Solution
No caller ID	You must subscribe to combined caller ID
information while	with call waiting as a single service to see
on a call.	call waiting information.

In case of difficulty

91

Image 94

AT&T 974 Operation during, Power failure, Screen displays, Display screen, Is blank, Intercom, hold, line, No caller ID

Contents

Please also read Part 1 Important product information Contents Contents Directory operation Product overview Product overview Tools needed Parts listBefore you begin Your box should include Before you begin DSL users Glossary Glossary From Programmable features list Prime line Programmable Features ListCovm reset Automatic CSL delay ring Reset allReturn all features To default settings Console Choose another number for this Audible signalsTone, repeating DND mode Extension Installation InstallationBattery installation Battery installation Replace the battery compartment cover and the screw Table/desk installation Recommended wiring configuration for phone system Two two-line jacks Table/desk installationConnect the handset cord Initialization Wall installationConnect the power adapter to the telephone Check for dial tone Reverse the handset tab Wall installationConnect the telephone line cords to the telephone as shown Lines 3 Two-line Initialization Convenience ports Four one-line jacks Menu operation Menu operation Menu structure Shortcut to language menu OperationMenuRapid scroll Feature setup Feature setupSet one touch preference Extension no and the current setting Assign an extension number to your phone Turn the ringer on or off for each line Select the ringer type Set delay ring Turn auto-mute on or off Set dial mode Turn hold reminder on or off Hour and the current hour setting Set the time and date For lines 2 Turn line usage on or off for each lineMake outgoing or transfer calls Assign the prime line line preference Press or to scroll through the line choices Line 1 … Line Set automatic mode Press or to toggle between Set the scroll rate See Rapid scroll on page 22 for details Turn screen backlight on or off Turn Covm indicators on or off for each line COVMHON/OFF Reset Covm indicator L1HCOVMHRESET Program home and local area codes Assign the line group for this phone Erase all settings and return the phone to default settings ENTERResethall? Set this phone to be the Centrex console phone Set the display language Set the Centrex console delayed ring timeLanguage and the current setting Press or to scroll through the language Make or answer a call Telephone operationTelephone operation Handset Headset OperationMake or answer a call Timer Switch between handset, headsetSpeakerphone Call privacy Cancel call privacyRestore call privacy Do not disturb Volume Redial Auto redial Redial stackOR- Press K Hold Switch between linesTurn hold reminder on or off on page 29. If you Flash MuteTemporary tone dialing To talk privately with one party Conference callsTo drop one line Transfer a call Blind transfer Transfer a call and speak to the receiving party Low battery indicatorAnswer a transferred call Lights and what they mean One touch operation One touch operation Store a number in a one touch location Store a pause in a one touch entry Store temporary touch tone signals in a one touch entryStore a flash in a one touch entry Review a one touch entry If One touch preference is set to Intercom Dial a one touch numberIf One touch preference is set to Telephone Directory operation To enter directory modeDirectory operation Press Dto begin working with the directory Use the dial pad keys and the chart below toStore a name and number in the directory Press 2once for A, twice for B, three times for Store a pause in a directory number Store a name and number in the directory Store a temporary tone signal in a directory number Store a flash in a directory number Review directory entries Edit a directory entry Remove a name and number from the directory Dial a number from the directoryRemove all entries from the directory Intercom operation Intercom operation Basic intercom operations Handset Make an intercom call withTo step Speakerphone or headset Answer an intercom call End an intercom or page call Auto-mute off Answer a single-phoneAuto-mute on All system phones Answer a system-wide Make an intercom conference call Room monitor Caller ID operation Caller ID operation Caller ID display Call waiting Simultaneously Display screen messages Call history Message waiting and NEW Call lightView call history summary Review records in call history Call history History Remove calls from call historyRemove a specific call record from call Remove all calls from call history Dial options Automatic mode onDial a number from call history See Review records in call history on Save a name and number from call history to the directory Save a number from call history To a one touch location Adding a fax machine Using a fax switchAdding a fax machine General product care General product care Power adapter Technical specificationsTechnical specifications Battery Case of difficulty Case of difficulty Make sure you have programmed your Signal not receivedIntercom paging Intercom extension number correctly Connected Line usage on or off for each line On when no line isLine lights remain Line group for this phone on Operation during Power failureAdvanced features do Screen displays Setup Central office. To clear, see ResetCovm indicator on page 37 in Feature See Turn Covm indicator on or off for Expanding the phone system Expanding the phone systemLine groups Telephone Lines in System Private lines Telephone Lines TLs in System Centrex operation Setup checklistEnable the console phone Centrex operation Answer a delayed ring Set ring delay durationPick up another station’s line Index Index Default settings Delay ring Delayed ring Covm 5 Covm indicator 8, 36-37CSL delay ring Date Dial mode Dial options Dial pad key 100 101 102 Case of difficulty, visit our service center at Advanced American Telephones. All Rights reserved