AT&T 974 user manual Telephone operation, Make or answer a call, Handset, Speakerphone

974CIB_06 4/7/06 3:32 PM Page 43

Telephone operation
	￿NOTE: This phone comes programmed to use line 1
	(default prime line) for calls if you do not press a LINE
	button. (To change the prime line, see Assign the
	prime line on page 32 of this manual.) When you
	answer a call, the phone automatically selects the ringing
	line.
	Make or answer a call
	￿NOTE: This phone will automatically make and
	answer calls in the mode (speakerphone or headset)
	you programmed (see Set automatic mode on
	page 33). Follow the directions below to choose a
	mode manually. If the phone is in use on one line, any
	other calls made or answered will use the same mode
	already in use.
	￿NOTE: If you dial a phone number longer than 15
	digits, the screen will display only the last 13 digits.
iiii	Handset
	To make a call, lift the handset and dial the call.
	To answer a call, lift the handset. Replace the handset
	to end the call.
	To override automatic line selection, press the LINE
	button for the line you wish to select, then lift the handset.
iiii	Speakerphone
	To make a call, press and release the desired LINE
	button or K. The SPEAKER light goes on. Wait
	for a dial tone, then dial the call. Press Kto end
k	the call.
	To answer a call, press Kor press the LINE
	button of the incoming call. Press Kagain to
	end the call.
	￿NOTE: If headset is programmed as the default mode
	(see Set automatic mode on page 33), you must
	press Kto activate the speakerphone.
	continued on page 44

Telephone operation

43