AT&T CL82450 user manual Key tone, Set date/time, Handset settings, Menu/Select

Telephone settings

Handset settings

NOTES:

1.Your telephone service provider voicemail might alert you to new messages with a stutter (broken) dial tone. Contact your telephone service provider for more details.

2.For information about using your voicemail service, contact your telephone service provider.

Key tone

The handset is set to beep with each key press. If you turn off the key tone, there are no beeps when you press keys.

1.Press MENU/SELECT in idle mode to enter the main menu.

2.Use qCID or pDIR to scroll to >Settings, then press

MENU/SELECT.

3.Use qCID or pDIR to scroll to >Key tone, then press

MENU/SELECT.

4.Press qCID or pDIR to highlight On or Off.

5.Press MENU/SELECT to save your preference. There is a

confirmation tone and the screen returns to the main menu. Press OFF/CLEAR to cancel.

Set date/time

>Key tone

Set date/time

KEY TONE

>On

The answering system announces the day and time of each message prior to playing it. Before using the answering system, set the date and time as follows. If you subscribe to caller ID service, the day, month and time are set automatically with each incoming call. The year must be set so that the day of the week can be calculated from the caller ID information. You can turn off the date and time settings of the caller ID service and use your own settings for each incoming call (see the Use caller ID to automatically set date and time section on the following page).

After a power failure, handset registration or deregistration, the system reminds you to set the date and time for backup before entering idle mode.

Follow the steps below to set the month, day, year and time.

1.When the handset is in idle mode, press MENU/SELECT to enter the main menu.

2.Press qCID or pDIR to scroll to >Settings, then press

MENU/SELECT.

3.Press qCID or pDIR to scroll to >Set date/time.

4.Press MENU/SELECT twice to select >Date & time.

5.Press qCID or pDIR to select the month then press

MENU/SELECT, or enter the number using the dial pad keys.

>Set date/time Home area code

>Date & time CID time sync

12