AT&T CL82450 user manual Create directory entries, To create a new directory entry, Menu/Select

Directory

Create directory entries

To create a new directory entry

1.	Press MENU/SELECT in idle mode to enter the main menu.
		Answering sys
2.	Press qCID or pDIR to scroll to >Directory, then press
		>Directory
	MENU/SELECT.
3.	Press qCID or pDIR to highlight Add contact.
4.	Press MENU/SELECT.
		REVIEW
5.	Enter the telephone number when prompted.
		>Add contact
	• Use the dial pad to enter up to 30 digits.
	– Press qCID or pDIR to move the cursor to the left
	or right.
		ENTER NUMBER
	– Press MUTE/DELETE to erase a digit.
	– Press and hold MUTE/DELETE to erase all digits.	888-883-2445_
	– Press and hold REDIAL/PAUSE to enter a three-second
	dialing pause (a p appears).

–Copy a number from the redial list by pressing REDIAL/PAUSE then qCID or pDIR, or pressing REDIAL/PAUSE repeatedly to locate the number to copy. Press MENU/SELECT to copy the number.

6.Press MENU/SELECT to save the number in the display.

The display shows Already saved if the number is already in the directory. You cannot save the same number twice.

7.Enter the name when prompted.

•Use the dial pad to enter a name (up to 15 characters). Each time you press a key, the character on that key appears. Additional key presses produce other characters on that key. See the chart on the next page.

–Press qCID or pDIR to move the cursor to the left or right.

–Press 0 to add a space.

–Press MUTE/DELETE to erase a letter.

–Press and hold MUTE/DELETE to erase all letters.

ENTER NAME Robert Brown_

Saved

NOTE:

1.The first letter of every word is a capital letter. The remaining letters in a word start as lower case letters as shown in the chart on the next page.

2.You cannot store a new number to a full directory until you delete one. The screen shows Directory full.

30