AT&T CL82450 Remote access code, To change the remote access code, Answering system settings

Telephone settings

Answering system settings

•Toll saver - the answering system answers a call after two rings if you have new messages, and after four rings when there are no new messages. This feature allows you to check for new messages and avoid paying long distance charges when calling from out of your local area.

6.Press MENU/SELECT to confirm your setting. You hear a confirmation tone. Press OFF/CLEAR to cancel.

NOTE: If you subscribe to voicemail service through your telephone service provider, see Answering system and voicemail on page 40.

Remote access code

To access your answering system remotely from any touch-tone phone, you need to enter a two-digit number (00-99). Unless you change it, the remote access code is 19.

To change the remote access code:

1.When the handset is in idle mode, press MENU/SELECT to enter the main menu.

2.Press qCID or pDIR to scroll to >Answering sys, then press MENU/SELECT.

3.Press qCID or pDIR to scroll to >Ans sys setup, then press MENU/SELECT.

4.Press qCID or pDIR to scroll to >Remote code, then press MENU/SELECT.

5.Use the dial pad to enter a two-digit number. Use MUTE/DELETE to backspace and delete a digit.

6.Press MENU/SELECT to confirm your setting. You hear a confirmation tone. PressOFF/CLEAR to cancel.

Play messages >Answering sys

>Ans sys setup

-End of list-

>Remote code Msg alert tone

REMOTE CODE

19

19