AT&T CL82450 Handset operation, Speakerphone, Last number redial, Redial/Pause, To edit a number

Telephone operation

Handset operation

Speakerphone

During a call, press /SPEAKER� to switch between handsfree speakerphone and normal handset use. Press OFF/CLEAR to hang up.

Elapsed time

NOTES:

Speaker 0:00:30

1.If you use the speakerphone during low battery mode, the key pad of the handset and the /SPEAKER� button are lit .

2.The speakerphone uses more power than the normal handset. If the handset battery becomes very low while you are using the speakerphone, the call

remains in speakerphone mode until you hang up or the battery becomes depleted. When the battery is very low, you cannot switch a call from normal handset use to speakerphone mode.

3.After installing a battery into the handset, the screen may show Low battery. If you use the speakerphone at this time, the battery may become depleted. Follow the instructions in the Battery installation and charging section on pages 6-7.

Last number redial

The last 20 telephone numbers dialed (up to 30 digits) are stored in the system memory.

To view the 20 most recently dialed numbers:

• To display the most recently called number, press	Redial
REDIAL/PAUSE.
	888-883-2445
• To view up to 20 recently called numbers, press REDIAL/PAUSE
then qCID or pDIR, or press REDIAL/PAUSE repeatedly.

The handset beeps twice at the end of the list.

Press OFF/CLEAR to exit.

To redial a number:

•To dial the displayed number, press PHONE/FLASH or /SPEAKER� .

-OR-

•Press PHONE/FLASH or /SPEAKER� , then press REDIAL/PAUSE repeatedly to view the redial memory. Press MENU/SELECT to dial the displayed number.

To edit a number:		ENTER NUMBER
•	While the desired number displays, press MENU/SELECT.	888-883-2445
•	Press OFF/CLEAR to backspace and delete characters, or
	use the dial pad to enter the number.

To delete a number:

•While the screen displays the desired number, press MUTE/DELETE to delete the number from the redial memory.

22