Caller ID
Caller ID operation
View dialing options
Although the incoming call log entries have 10 digits (the area code plus the
While reviewing the call log, press # repeatedly to show different dialing options for local and long distance numbers before dialing or saving the telephone number in the directory.
Press 1 repeatedly if you need to add or remove 1 in front of the telephone number before dialing or saving it in the directory.
When the number is in the correct format for dialing, press PHONE/FLASH or /SPEAKER� to call the number.
Press #
Press 1
To save the number to the directory, see Save a call log entry to the directory on the next page.
Dial a call log entry
1.When in the call log, press qCID or DIRp to browse.
2.Press PHONE/FLASH or /SPEAKER� to dial the entry.
Delete entries
•Press MUTE/DELETE to delete the shown entry from the caller ID history.
•Follow the steps below to delete all call log entries.
1.Press MENU/SELECT when in idle mode.
2.Press qCID or pDIR to scroll to >Call log, then press MENU/SELECT.
3.Press qCID or pDIR to scroll to >Del all calls, then press MENU/SELECT.
4.When the screen shows Delete all calls? press
MENU/SELECT to clear the caller ID history of all entries (there is a confirmation tone), or press OFF/CLEAR to exit and leave all entries in the caller ID history intact.
Review
>Del all calls
37