Getting started
Telephone base installation
Install the telephone base as shown below.
The telephone base is ready for tabletop use. If you want to change to wall mounting, see page 10 for details.
7.Plug the large end of the AC power adapter into a power outlet not controlled by a wall switch.
1. Plug the small end of the |
AC power adapter into the |
power jack on the bottom |
of the telephone base. |
2. Plug one end of the |
6.Plug the other end of the telephone line cord into a telephone jack or a DSL filter.
5.Raise the antenna.
If you have DSL high speed Internet service, a DSL filter (not included) is required.
telephone line cord |
into the telephone |
jack on the bottom of |
the telephone base. |
3. Plug the other
end of the coiled
handset cord
into the jack at
the left of the telephone base.
4.Place the cords into the channels.
