Appendix

Troubleshooting

Charge the battery in the cordless handset for at least 16 hours. For optimum daily performance, return the cordless handset to the handset charger when not in use.

You may have too many extension phones on your telephone line to allow all of them to ring simultaneously. Try unplugging some of the other phones.

The layout of your home or office might be limiting the operating range. Try moving the telephone base to another location, preferably to a higher location.

If the other phones in your home are having the same problem, contact your telephone service provider (charges may apply).

Test a working phone at the phone jack. If another phone has the same problem, contact your telephone service provider (charges may apply).

Other electronic products such as HAM Radios and other DECT phones can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices.

Remove and install the battery again. Place the cordless handset in the telephone base. Wait for the cordless handset to reestablish its connection with the telephone base. Allow up to one minute for this to take place.

Your line cord might be malfunctioning. Try installing a new line cord.

My calls cut in and out while I’m using my cordless handset.

Other electronic products such as HAM Radios and other DECT phones can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices.

Do not install this phone near a microwave oven or on the same electrical outlet. You might experience decreased performance while the microwave oven is operating.

If you plug your phone in with a modem or surge protector, plug the phone (or modem/surge protector) into a different location. If this does not solve the problem, relocate your phone or modem farther apart from one another, or use a different surge protector.

Relocate your telephone base to a higher location. The phone might have better reception when installed in a high area.

If the other phones in your home are having the same problem, contact your telephone service provider (charges may apply).

The charge light is off or blinking.

Make sure you plug the power and line cords in correctly and securely.

Unplug the electrical power. Wait for 15 seconds, then plug it back in. Allow up to one minute for the cordless handset and telephone base to reset.

79

Page 85
Image 85
AT&T CL84350 user manual My calls cut in and out while I’m using my cordless handset, Charge light is off or blinking