Getting started
Battery installation & charging
CHARGE light
Step 1 | Step 2 | Step 3 |
Plug the battery connector securely into the socket inside the handset battery compartment, matching the
Align the cover flat against the battery compartment cover, then slide it upwards until it clicks into place.
Charge the handset by placing it face up in the telephone base or charger. The CHARGE light will be on when charging.
To replace the battery, press the tab and slide the battery compartment cover downwards. Lift out the old battery and disconnect it from the handset. Follow the instructions above to install and charge the new battery.
IMPORTANT INFORMATION
Use only the supplied rechargeable battery or replacement battery (model BT8001). To order, visit our website at www.telephones.att.com, or call