AT&T EL52209, EL52409 Remote access code, Press qCID or DIRp to change the remote access code

Handset settings

Answering system settings

Remote access code

To access your answering system remotely from any touch tone phone, you need to enter a two-digit number (10-99). Unless you change it, the remote access code is 19.

To change the remote access code:

1.When the handset is in idle mode, press MENU/SELECT to enter the main menu.

2.Press MENU/SELECT again.

3.Press qCID or DIRp to scroll to >ANS SYS SETUP, then press MENU/SELECT.

4.Press MENU/SELECT to scroll to >REMOTE CODE, then press

MENU/SELECT.

5.Press qCID or DIRp to change the remote access code.

6.Press MENU/SELECT to confirm your setting. A confirmation tone sounds.

>ANS. SYSTEM

DIRECTORY

>ANS SYS SETUP PLAY MSGS

>REMOTE CODE MSG ALERT TONE

REMOTE CODE 19

17